specifications subject to change without notice. dimensions (mm). see appendix a for recommended power cord. see pdi full line catalog for detailed specifications on power cords. right angle, flange mount filter with iec 60320 ac inlet socket. pa series mechanical dimensions features general purpose, low cost filter with iec connector providing effective equipment protection of line-to-ground noise up to 15 amp, 250vac. the compact design filter with low leakage current is well suited for applications that require strict emission standards. these filters are also available for medical application and offer extremely low leakage current to comply with various industry standards. a bleeder resistor can be added to prevent excessive volt- ages from developing across the filter capacitors when thereis no load. applications computer & networking equipment, measuring & control equipment, data processing equipment, laboratory instruments, switching power supplies, other electronic equipment. technical data ? rated voltage: 115/250vac ? rated current: 1a, 2a, 3a, 6a, 10a, 15a ? power line frequency: 50/60hz ? max. leakage current each line to ground: @ 115vac 60hz: 0.25ma @ 250vac 50hz: 0.45ma @ 115vac 60hz: 2 a* @ 250vac 50hz: 5 a* ? hipot rating (one minute) line to ground: 2250vdcline to line: 1450vdc ? temperature range: -25c to +85c (unit: mm) * medical application 50.1 30.3 22.5 g g 40.0 2x 3.3 13.9 32.8 20.2 24.4 36.3 39.8 40.0 30.5 2x 3.5 4x r4.5 suggested panel cutout (mounting from front) 21.8 41.3 28.4 2 145 algonquin parkway, whippany, nj 07981 ? 973-560-0019 ? fax: 973-560-0076 e-mail: filtersales@powerdynamics.com ? www.powerdynamics.com
current rating (a): = 01 = 02= 03 = 06 = 08 = 10 = 15* terminal: = q = s= w options: = 00 = 50**= 60 quick connect solderwire no bleeder resistor bleeder resistor (1/4 w, 1m) bleeder resistor (1/2 w, 1m) component locations: = 1 = 2 b = 3 b = 4 b = 1m = 2m b standard type without c(x); c(y) only c(x) & c(y) behind l without c(x) & c(y) without c(y); c(x) only without c(y); c(x) behind l pa series example & ordering code 6.3/0.25 4.0/0.187 ul 1015, 18awg stranded, 4? schematics attenuation code table: non-medical applications, select attenuation code with corresponding component values from the table. = a = b = c= d = e = f = g = h = i = j b = k b 8.0 3.0 -3.6l 6.6 2.0 -3.0l 4 b contact pdi for attenuation numbers 8 contact pdi for availability *15a for ul, cul; 10a for ce, vde** n/a for 15a c x g line load l mh l mh cy l n l l' n' g' cy r g line load l mh l mh cy l n l l' n' g' cy r 1 2 g line load l mh l mh l n l l' n' g' r cy cy c x g' g line load l mh l mh l n l l' n' r 3 medical schematics g' c x g line load l mh l mh l n l l' n' r g' g line load l mh l mh l n l l' n' r c x 2m 1m cx cy inductance per current rating (mh) (?) (pf) 1a 2a 3a 6a 8a 10a 15a 0.1 2200 6.5 3.8 2.5 0.8 1.05 0.2 0.2 0.015 3300 1.9 1.5 1.1 0.6 8 0.3 0.2 0.1 3300 3.7 2.7 1.8 0.8 1.05 0.3 0.2 0.1 1000 10.5 4.2 2.5 1.05 8 0.3 0.2 0.047 3300 4.6 3.4 2.5 0.9 8 0.3 0.2 0.033 3300 9.5 4.3 1.8 0.85 8 0.3 0.2 0.047 2200 10.5 4.0 1.2 0.53 8 0.3 0.2 0.033 2200 5.0 3.7 1.8 0.6 8 0.2 0.2 without cx without cy 10.5 6.5 2.5 1.05 8 0.3 0.2 0.22 2200 6.5 4.0 2.5 0.8 1.05 0.3 0.2 0.22 3300 6.5 4.0 2.5 0.8 1.05 0.3 0.2 cx inductance per current rating (mh) (?) 1a 2a 3a 6a 8a 10a 15a 0.1 6.5 3.8 2.5 0.8 1.05 0.2 0.2 0.015 1.9 1.5 1.1 0.6 8 0.3 0.2 0.1 3.7 2.7 1.8 88 0.3 8 0.047 4.6 3.4 2.5 0.9 8 0.3 0.2 0.033 9.5 4.3 1.8 0.85 8 0.3 0.2 0.22 6.5 4.0 2.5 0.8 1.05 0.3 0.2 0.047 10.5 4 1.2 0.53 888 0.033 5 3.7 8 0.6 8 0.2 8 medical applications, select attenuation code with corresponding component values from the table. = m1 = m2= m3 = m4 = m5 = m6 = m7= m8 3 145 algonquin parkway, whippany, nj 07981 ? 973-560-0019 ? fax: 973-560-0076 e-mail: filtersales@powerdynamics.com ? www.powerdynamics.com pa - - 01 q 50 1 c
4 145 algonquin parkway, whippany, nj 07981 ? 973-560-0019 ? fax: 973-560-0076 e-mail: filtersales@powerdynamics.com ? www.powerdynamics.com medical applications non-medical applications pa series attenuation tables comm. mode(l-g) in mhz diff. mode(l-l) in mhz .15 .5 1 5 10 30 .15 .5 1 5 10 30 34 38 39 32 16 21 9 26 37 62 51 11 29 32 34 30 19 16 8 23 34 60 48 13 28 35 37 28 22 19 8 19 28 52 44 12 18 22 24 27 25 18 8 18 26 52 45 27 8 13 15 17 16 14 8 18 25 32 28 24 7 12 15 16 14 11 7 17 24 41 32 23 25 31 33 30 24 21 1 5 14 41 46 17 23 27 28 29 24 23 1 5 14 45 58 15 19 22 24 27 27 20 1 4 10 39 50 34 15 21 24 23 21 17 1 4 9 30 49 28 11 16 18 17 16 12 1 4 8 26 45 24 7 13 15 16 14 11 1 3 7 26 39 23 29 33 34 30 20 16 8 24 35 58 45 15 28 35 37 28 22 24 8 20 29 61 48 15 25 33 58 51 56 41 8 20 30 57 47 13 19 26 29 28 25 14 8 18 26 46 43 22 11 16 18 18 16 12 8 18 24 47 36 24 36 41 43 37 32 28 8 23 34 60 53 30 31 37 39 35 29 22 8 22 32 66 55 22 28 35 37 28 21 21 8 20 29 54 44 14 22 28 31 30 27 16 8 18 26 43 43 26 12 16 18 20 19 15 8 18 24 49 42 27 32 37 40 35 29 23 3 15 25 74 58 21 29 33 34 30 16 21 3 16 27 57 50 20 28 35 37 28 22 23 3 13 22 59 48 16 18 23 25 27 26 20 3 12 19 48 49 30 11 16 18 18 17 14 3 11 17 42 38 27 7 13 15 16 14 11 3 11 17 43 30 22 36 41 43 37 31 25 1 12 23 54 57 28 32 37 40 36 30 22 1 11 22 63 59 24 23 27 28 31 30 30 1 10 19 61 52 32 19 26 29 29 25 17 1 8 15 39 45 25 11 16 18 18 17 14 2 8 14 42 34 25 4 13 15 16 14 11 1 8 14 48 29 21 36 41 43 37 32 28 3 16 27 64 60 31 31 37 40 36 29 25 3 15 25 80 60 25 20 24 25 26 24 23 3 12 21 47 42 22 14 17 19 22 22 19 3 11 18 43 35 29 11 16 18 18 16 12 3 11 17 48 34 23 32 36 37 28 19 11 1 14 26 53 42 16 29 33 34 31 20 17 1 13 24 61 50 14 23 26 28 31 30 31 1 9 19 54 53 29 16 19 21 24 24 21 2 8 15 56 38 33 11 16 18 18 17 14 2 8 14 41 34 25 comm. mode(l-g) in mhz diff. mode(l-l) in mhz .15 .5 1 5 10 30 .15 .5 1 5 10 30 34 38 40 32 26 11 8 25 37 71 62 12 29 32 55 48 49 51 8 23 34 68 64 14 28 36 39 45 48 39 8 19 27 58 65 15 18 24 28 44 50 47 8 18 26 43 51 31 8 14 18 33 41 39 8 18 25 29 38 31 7 14 19 34 40 38 7 17 23 39 47 27 25 31 33 30 25 14 1 4 12 50 64 16 24 28 20 53 54 55 1 4 13 53 57 16 19 22 24 27 27 22 1 3 8 48 59 31 15 24 30 44 52 40 1 4 8 36 52 28 11 18 23 39 49 37 1 4 8 26 46 24 7 15 20 38 46 37 1 4 8 25 48 28 29 33 47 53 57 41 8 23 35 73 58 14 28 37 44 52 56 41 8 19 27 74 59 17 25 33 46 53 57 44 8 19 29 63 62 13 19 29 36 49 55 46 8 18 23 50 54 24 11 19 24 41 53 36 8 18 24 51 46 25 7 15 21 37 46 36 7 17 23 39 48 27 36 41 41 49 49 46 8 23 33 62 62 32 36 41 41 49 49 46 8 23 33 62 62 32 28 35 37 41 42 42 8 19 28 56 57 17 21 28 31 41 44 41 8 18 25 45 48 29 12 16 19 45 37 41 8 18 24 52 53 30 7 13 16 28 32 37 7 17 24 32 32 30 32 39 55 55 56 52 3 14 25 75 63 24 29 34 46 56 58 49 3 15 27 67 59 21 28 38 44 51 58 39 3 12 20 66 57 18 18 25 31 49 56 47 3 11 17 55 59 32 11 19 24 40 50 40 3 12 17 48 46 29 7 14 20 39 45 37 3 11 17 50 46 29 36 41 62 54 50 36 1 11 22 64 70 29 32 39 56 56 58 58 1 10 21 76 62 23 23 29 35 53 52 40 1 9 17 66 65 33 19 29 35 51 54 49 2 8 13 47 57 28 11 19 25 40 51 39 2 9 14 46 51 29 4 15 21 36 44 38 1 8 14 50 46 26 36 41 59 54 54 47 3 15 26 68 71 32 31 37 47 51 49 40 3 14 24 69 63 26 20 25 28 44 49 42 3 12 19 61 57 27 14 19 22 39 48 41 3 11 17 48 50 33 11 17 22 36 42 38 3 11 17 39 55 27 4 14 19 34 40 38 3 12 17 38 42 28 32 34 52 44 44 41 1 14 25 60 66 21 29 32 56 49 50 45 1 12 24 67 62 14 23 27 30 49 52 46 1 9 17 59 69 30 16 20 24 42 51 42 1 8 14 58 52 33 11 17 22 36 41 40 2 8 14 37 54 27 4 14 19 33 39 39 1 8 14 48 42 28 36 42 43 37 31 36 1 2 5 17 23 33 30 37 39 29 22 27 1 1 3 14 21 13 28 35 37 28 22 31 1 1 2 11 18 12 21 29 32 31 27 17 1 1 1 7 12 23 11 16 18 18 17 14 1 1 1 5 3 9 6 12 15 16 15 11 1 1 1 1 3 6 attenuation code a b c d e f g h i attenuation code m1 m2 m3 m4 m5 m6m7 m8 current rating 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a 1a 2a3a 6a 10a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a 1a 2a3a 6a 10a g this table applies to schematic 1m only. visit our website or contact pdi for other schematic attenuation numbers. v this table applies to schematic 1 only. visit our website or contact pdi for other schematic attenuation numbers. v g insertion loss in db (50 ohm circuit) insertion loss in db (50 ohm circuit) current rating 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a 3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a 1a 2a3a 6a 10a15a
|
